Powell Electronics offers full Nelson heat shrink boots and automatic shrink cold action shrink boots and sleeves from Glenair. Benefits from a wide temperature range (-75C to 175C heat shrinkable boots and -65C to 300C cold shrinkable boots and sleeves), and neither line requires a heavy back case or tapered adapter
Flex Power Modules provide its first two-phase regulated voltage module, the BMR510, with a total continuous output current of 80A and a total peak output of 0.5-1.3V from 4.5-16V inputs for 140A. Less than 0.7cm3 (10mm x 9mm x 7.6mm), the module provides a complete power supply phase, combined with magnetic, highly specified regulator modules for space-limited applications.
The test fixture range offers a range of sizes and customization options. For better flexibility, the product line is tested and offers reduced rework after the test fixture has been completed, product changes. These test fixtures provide reliable electrical contact between the UUT and the test equipment, providing the foundation for an excellent production quality control system to ensure repeatable results each time.
The SBG system released the PulSE-40 inertial Measurement Unit. The device offers a six-degree-of-freedom tactical-class IMU and integrates advanced MEMS triaxial accelerometers and gyroscopes in a unique redundant design that minimizes system size while elevating performance levels to the highest possible level. And the device was designed with reliability in mind from the start
Toshiba Electronics Europe LTD has released a three-phase brushless DC motor control pre-drive IC. The new TC78B011FTG includes a sinusoidal drive method for vibration and noise reduction. The device is feature-rich, including selectable closed-loop or open-loop speed control, with supply voltage ranging from 5.5V to 27V. The device adopts P-WQFN36-0505-0.50-001 package, covers an area of only 5mm × 5mm and has a height of 0.8mm.
OKW expands its already extensive range of medical electronics products. Its new case and tuning knob medical device manual covers more than 3,000 different products, all renowned for ergonomic design, user-oriented features, and high quality styling and finishes.
Lane Motorsport has been appointed racing specialist distributor for LEMO's M Series and F Series connectors. The M Series will complement the existing = Eaton 8STA franchise high-density contacts up to 114 way or 66 way hybrid power contacts for a maximum housing size of 5. Lane Motorsport supplies connectors and accessories to major suppliers including Eaton Souriau, Nicomatic, Weald Electronics and HellermannTyton.
Gowanda Electronics has launched its first series of ceramic core chip inductors for power applications, the SMP0603. The product line is designed to meet the needs of the power electronics market for high-current processing ceramic chip inductors, and the series of 37 discrete components provide a performance range ranging from 1.8nh to 27nH, DCR ohms from 0.01 to 0.04 and rated current mA DC from 1750 to 3400. The operating temperature of this power series ranges from -40℃ to +125℃.
Indium Has expanded its manufacturing capabilities to help customers meet the increasingly demanding demands of fine-pitch applications. Designed to provide customers with a fine wire solution to the problem of increased solder spot density and miniaturization in applications where solder paste reflow and other welding methods are ineffective, the fine diameter steel wire can be used for SAC305, SAC387, SN96.5AG3.5, SN96.3AG3.7 and Sn96Ag4 alloys
Rohde & Schwarz works with Realtek to comply with current and future open Alliance standards. The development of DAS and enhanced infotainment applications requires the development of on-board communications to support the higher data rates required. Product validation must take place before a new product is put on the market. Rohde & Schwarz's high performance test instruments and fixtures provide the performance required to verify compliance with standards.
Diodes Incorporated introduced the DGD0579U high-side and low-side gate drivers. Its 100V floating high-end driver provides greater flexibility for applications requiring high power. Advanced MOSFET protection mechanisms are integrated directly into the device, improving system reliability, optimizing board space usage, reducing the number of components compared to traditional discrete solutions, providing a power-managed enable pin and ultra-low (& LT; 1μA) standby current, the device helps prolong battery running time
RECOM offers its new AC/DC open frame power racM600-L series. The series is designed for reliable and cost-effective operations in high availability applications. Certification includes 2 x MOPP medical safety (IEC/EN/CSA/ ANSI/ aami-es 60601-1), up to 3000m, and leakage current suitable for BF applications. With up to 93% efficiency, the series can be connected in parallel with internal OR-ING diodes and active current sharing for redundancy or increased output. The device is an open frame, rugged, U-channel format
Mouser provides engineers with the latest resources and information to build their designs. Mouser guides clients through the planning process by providing consistent content, services, and tools. Several products are available for use in harsh environments
Olympus precV software allows production, quality control and inspection users to take precise, repetitive 2D measurements and get results that conform to the latest industry standards. The software turns any manual microscope into an integrated imaging and measurement platform with an intuitive interface that is easy to use, featuring navigation tabs that group software functions using large and clear label buttons.
E-peas has announced the completion of a major project by Swiss luxury watchmaker Cartier. The key performance parameter that sets the company's PMC apart from others is its ability to start and efficiently collect energy in low light conditions, so that weak indoor light is enough to power the watch. The ultra-compact PMIC, developed specifically for the Tank Watch, is only 2mm x 2mm, making it smaller than any other energy collection solution
The KL-FA series is a compact system that utilizes its KT Series gaskets to route and seal any combination of pre-terminal cables, conduits or pneumatic hoses. No tools are needed to assemble - once inside the frame to install the rims and cables, the lid can be closed and locked to the lower part by pressing down on two clamping rods. Main specifications include IP class IP54 (EN 60529), flame retardant class UL94-V0, self-extinguishing, polyamide material, operating temperatures -40 ° C to 140 ° C, UV resistance, silicon free, halogen free and screw mounted.
Toshiba Electronics Europe LTD has released three load switches that significantly reduce static current. The new TCK12xBG family of devices provides a new driver circuit developed by the company to achieve a typical on-state static current (IQ) of only 0.08nA. There are three units in the series: the TCK127BG offers automatic discharge when activated at high activity, and all the new units are installed in the recently developed WCSP4G package, which occupies only 0.645mm x 0.645mm board area and is 0.465mm high
Cortec laboratories have developed new specialty films for electronics, munitions, fertilizers and other industrial applications where electrostatic discharge can lead to hazardous packaging conditions. The film provides excellent polymetallic corrosion protection, eliminating the static and expensive barrier packaging of conventional stretch films. The film can be used in standard manual and automatic stretch winding equipment. Is ideal for packing and unit load in any application that requires no shock
