Vishay Intertechnology has announced the upgrade of the TSOP2xxx, TSOP4xxx, TSOP57xxx, TSOP6xxx and TSOP77xxx series of infrared (IR) receiver modules with the new generation Cyllene 2 IC. The new IC is designed to ensure long-term supply and shorter lead times, helping designers significantly reduce supply currents over a wider range of supply voltages, while improving reliability against ESD and direct sunlight
The LT1767 is a 1.25MHz monolithic step-down switch regulator. The t1767 is an 8-pin lead-plated frame package and a low thermal resistance exposed liner package. Provides full cycle cycle term flow and thermal shutdown. High-frequency operation allows for reduced input and output filtering elements and allows the use of on-chip inductors.
Silicon Lab's ultra-low power digital isolators family are CMOS devices that offer significant data rate, propagation delay, power, size, reliability, and external BOM advantages over traditional isolation technologies. Car grades can be used for some parts numbers. These products are built using car-specific processes at all steps in the manufacturing process to ensure the robustness and low defects required for automotive applications.
The LT3060 series is a low-power, low-dropout (LDO) linear regulator that operates in the range of 1.6V to 45V input power supply. There are fixed output voltages of 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V and 15V, and adjustable voltage regulators with output voltage ranging from 600mV to 44.5V. The LT3060 voltage regulator uses thermally enhanced 8-lead TSOT-23 and 8-lead (2mm × 2mm × 0.75mm) DFN package.
AP1510 consists of step-down switch regulator and PWM control. These devices include reference voltage sources, oscillating circuits, error amplifiers and internal PMOS. AP1510 has low ripple power, high efficiency and excellent transient characteristics. Because the converter can accommodate up to 23V input voltage, it is also suitable for operation through AC adapters
RT8293A is a high efficiency monolithic synchronous step-down DC/DC converter that delivers up to 3A output current from 4.5V to 23V input power supply. Packaged in SOP-8 (Exposed Pad). The RT8293A also provides output voltage protection and thermal shutdown protection. Low current (< 3μA) Off mode provides output disconnect, making the battery powered system easy power management.
The MAX6338 quad voltage monitor is capable of monitoring up to four power supplies without any external components. Internal bandgap reference ensures accurate trip thresholds over the extended operating temperature range (-40°C to +85°C). The MAX6338 consumes 25µA(typical) supply current and operates at +2.5V to +5.5V. The MAX6338 comes in a 10-pin µMAX package.
The LT1161 is a four-extremely high-side gate driver that allows the use of low-cost n-channel power MosFeTs for high-side switching applications. It has four separate switching channels, each containing a fully separate charge pump to fully enhance N-channel MOSFET switches with no external components.
The LM2931 are very low drop regulators. The very low drop voltage and the low quiescent current make them particular suitable for low noise, low power applications and in battery-powered systems. In the 8-pin configuration (SO-8), fully compatible with the older L78L family, a shutdown logic control function is available.
The MC34163 series are monolithic power switching regulators optimized for dc−to−dc converter applications. The combination of features in this series enables the system designer to directly implement step−up, step−down, and voltage−inverting converters with a minimum number of external components. Potential applications include cost-sensitive consumer products as well as equipment in the automotive, computer and industrial markets.
The TDK InvenSense ICS-40800 Ultra-low noise oriented MEMS microphone features an ultra-high signal-to-noise ratio (SNR) of 70dBA and a sensitivity tolerance of ±1dB, making it ideal for far-field voice control and voice applications. Typical applications for ultra-low noise oriented MEMS microphones include tablets, teleconference systems, digital cameras, communications headsets, security and surveillance
The Flex Power module's PUC-BG series of DC/DC converters are packaged with the industry standard SIP7, fully packaged and installed through holes, and provide 2 W of output power. The product is rated for ambient derating from -40°C to +100°C, with full power up to +85°C in convective cooling environments. This performance is achieved by efficient designs that typically reach 80%. These components require no minimum load and provide continuous short-circuit protection.
Allegro MicroSystems A19351 Giant Magnetoresistance (GMR) AK Protocol Wheel speed/Direction sensor Integrated circuits (ics) are designed to measure ring magnets used in automotive braking systems. And adopt 2-pin SIP package (suffix UB), no lead (Pb), tinned lead frame. The UB package includes IC and protection capacitors integrated in a single moulded package, as well as an additional moulded lead stabilizer rod for sturdy transport and easy assembly.
Diodes Incorporated PI4IOE5V6416RQ The Diodes Incorporated PI4IOE5V6416RQ I/O expander is a 16-bit universal I/O expander that provides remote I/O expansion through an I2C bus interface for most microcontroller families. Providing a simple solution when additional I/O is required while minimizing interconnections, the I/O expander is ideal for sensor, button, keyboard, and battery-powered mobile applications (for connectivity)
The MP1530 combines a triple output step-up converter with linear regulators to provide a complete DC/DC solution. It is designed to power TFT LCD panels from a regulated 3.3V or 5V supply.
The MIC2253 is a high power-density, 1 MHz PWM DC/DC boost regulator. The 3.5A minimum switch current limit, combined with a 1 MHz switching frequency, allows the MIC2253 to use smaller inductors and deliver high power in a tiny solution size.
The AD9514 uses a multi-output clock distributed IC design that emphasizes low jitter and phase noise to maximize data converter performance. Other applications with phase noise and jitter requirements also benefit from this section. There are three separate clock outputs. Two of the outputs are lvvpecl, and the third output can be set to LVDS or CMOS level, with 32 pin LFCSP, working with a single 3.3V power supply. The temperature ranges from −40 ° C to +85 ° C.
Analog Devices ADG1206L/1207L multiplexer Switch ic is a monolithic iCMOS®= analog multiplexer consisting of 16 single channels and 8 differential channels. Typical applications include audio and video routing, automatic test equipment, data acquisition systems, battery powered systems, sampling and holding systems, and communication systems.
