The CDCVF2509 is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It is specifically designed for use with synchronous DRAMs. The CDCVF2509 operates at a 3.3-V VCC. It also provides integrated series-damping resistors that make it ideal for driving point-to-point loads
The DG9636 is a CMOS, dual SPDT analog switch designed to operate from 2.7V to 12V, single supply. All control logic inputs have a guaranteed 1.65 V logic HIGH threshold when operation from a 12 V power supply. This makes the DG9636 ideally suited to interface directly with low voltage micro-processor control signals
FDA803S and FDA903S are the latest single channel fully differential 10W Class D audio power amplifiers in the Italian French semiconductor FDA (pure digital amplifier) series. Target applications include emergency road rescue, remote information processing and any vehicle system that requires audio channel to generate voice, music or prompt messages with maximum 10W standard output power.
The STMICRO EVALST-3PHISOSD evaluation board implements a complete three-phase current meter with a low-cost shunt current sensor. The solution is based on the ISOSD61 device, a single-channel, electrically isolated second-order sigma-delta modulator that measures the current of each phase through a shunt current sensor.
The EL1528 is a dual channel differential amplifier designed for driving full rate ADSL signals at very low power dissipation. The high drive capability of 450mA makes this driver ideal for both CAP and DMT designs. It contains two pairs of wideband, high-voltage, current mode feedback amplifiers optimized for low power consumption in DSL systems
The X9429 integrates a single digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digital control potentiometer is realized by series array of 63 resistance elements. Between each element are tap points connected to the wiper terminal by a switch. The user controls the position of the wiper on the array through the 2-wire bus interface
The AMC1304 is a precision, delta-sigma (ΔΣ) modulator with the output separated from the input circuitry by a capacitive double isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation of up to 7000 VPEAK according to the DIN VDE V 0884-11, UL1577 and CSA standards. Used in conjunction with isolated power supplies, the device prevents noise currents on a high common-mode voltage line from entering the local system ground and interfering with or damaging low voltage circuitry.
The MPM38222 is a dual-channel DC/DC module. The module includes a monolithic, step-down, switch-mode converter with built-in, internal power MOSFETs and inductors. The MPM38222 is designed to simplify power system design and provide ease of use.
Both the MP6540 and MP6540A are 3-phase brushless DC motor drivers that integrate three half-bridges and are composed of six n-channel power MOSFETs, driver circuits, gate drive power supplies and current sampling amplifiers.
The LT1301 is a micropower step-up DC/DC converter that utilizes Burst Mode operation. The device can deliver 5V or 12V from a two-cell battery input. It features programmable 5V or 12V output via a logic-controlled input, noload quiescent current of 120µA and a shutdown pin which reduces supply current to 10µA.
NXP Semiconductors offers the NXH3675 high-quality audio streaming solution, a highly integrated, single-chip 2.4GHz transceiver certified to the Bluetooth 5.3 LE audio standard. The device allows developers to produce innovative products in the Bluetooth audio world with elements such as high-quality audio transmission, broadcasting capabilities, and multiple audio streams and data channels. With its optimised audio streaming protocol, the device provides ultra-low latency with ultra-low power consumption for advanced use cases.
TDK has developed a new TFM-BLE series thin film power supply circuit inductor. TDK integrates the film technology developed in the magnetic head business into the manufacturing of this series of inductors, and uses TDK's characteristic conductor forming technology to use magnetic metal materials with high saturation magnetic flux density as core materials, so as to meet the DC bias characteristics required by inductors in power circuits, and optimizes space constrained applications such as smart phone power circuits
The ISL60002 FGA voltage references are very high precision analog voltage references fabricated using the Renesas proprietary Floating Gate Analog (FGA) technology and feature low supp
The 17529 is a monolithic dual H-Bridge power IC ideal for portable electronic applications containing bipolar step motors and/or brush DC-motors (e.g., cameras and disk drive head positioners).
The OPA330 series of CMOS operational amplifiers offer precision performance at a very competitive price. These devices are members of the Zero-Drift family of amplifiers which use a proprietary autocalibration technique to simultaneously provide low offset voltage (50-μV maximum) and near-zero drift over time and temperature at only 35 μA (maximum) of quiescent current.
The EL7457 is a high speed, non-inverting, quad CMOS driver. It is capable of running at clock rates up to 40MHz and features 2A peak drive capability and a nominal on-resistance of just 3. The EL7457 is ideal for driving highly capacitive loads, such as storage and vertical clocks in CCD applications. It is also well suited to ATE pin driving, level-shifting, and clock-driving applications.
The DAC7558 is a 12-bit, eight-way, voltage-output DAC with excellent linearity and monotony. Its proprietary architecture minimizes unnecessary transients such as code-to-code failures and channy-to-channel crosstalk. The low-power DAC7558 works from a single 2.7v to 5.5v power supply. Available in a 32 pin QFN package, suitable for range from -40°C to 105°C
ROHM has developed a small and efficient 20V voltage Nch MOSFET*1 "RA1C030LD", which is ideal for switching applications of wearable devices, wireless headphones and other listening devices, as well as smart phones and other thin and small devices.
